Specification product :
| Power | |
| KW | 1.5 |
| HP | 2 |
| Volt | 230 |
| Hz | 50/60 |
| Current | 16 A |
| Fitting | 1″x1″ |
| Flow Rate | 12 m3/h |
| Variable start-up pressure | 1.5 bar |
| Ports | |
| Inlet | 1″ |
| Outlet | 1″ |
| Berat | 163 kg |
Performance Range
- Max Flow rate : 200 l/min (12 m3/h)
- Working pressure 10 bar
- Restarting pressure 1.5 bar
Application Limits
- Maximum liquid temperature +65°C
- Ambient temperature up to +40°C
- Burs pressure > 40 bar
- Protection IP 65
- Voltage 230 V-Frequency 50/60 Hz
- Max current -10 A EASYPRESS-1-16 A EASYPRESS -2
CONSTRUCTION AND SAFETY STANDARDS
- Resinated and easily replaced electronic card for complete protection from humidity, fitted in the case with an IP 65 protection
- The electronic card inside EASYPRESS has undergone the stictest EMC test of electromagnetic compatibility
Installation and Use
The EASYPRESS series consists of electronic devices designed to start (whwn a tap is turned on) and stop (when a tap is turned off) single phase pumps.
A microprocessor protects the pump from dry running, and allows the pump tobe restarted either automatically. It also prevent the pump from starting too often when small leaks are present within an installation.
Patent-Trade Marks- Models
- Registered EU Design n. 868062
- Patent n. IT 1388969, IT 1388970
- EASYPRESS registered Trade Mark n. 0001334481
Option Available On Request
- EASYPRESS-1 version with restarting pressure 0.8 bar
- EASYPRESS-2 version with restarting pressure 2.2 bar
- Version with 1″NPT
- version with cable and schuko plug and socket
- Version with pressure gauge
Starting Pressure
There are three different models available, each with a different starting pressure and easily identified bt the coloured cap positioned at the rear of the EASYPRESS, for installation requiring delivery at various heights.