Category: Pompa APP Kenji

Features Compact size Modular design Light weighted Easy operation and high quality Application Light Duty Basement drainage Rainwater effluent and accumulated water drainage

Feature Non – Cloging Minimized abrasive wear Large immpeller clearance Maintenance free Applications Medium concentration wastewater, heavy duty JSB type is suitable for PH 3-11 waste water JSB type is also for se water

FeatureTipped with tungsten cutter to cut off foreigh objects and prevent from clogging Application Hospital, School, Building…., etc Wastewater treatment system , Industrial wastewater and ground water drainage

Feature Voltex impeller attached with agiator, reliale silicon mechanical seal. Application Dredging high concentration slurry

Feature High oxygen transfer rate, BOD easy remove from wastewater treatment Mixing and stirring applications for uniform MLSS due to fine bubles convention Application The wastewater treatment aeration and agitation for any kinds of factories

Features Light weight / tough designThermoplastic motor housing weight only 3 kgs Vertical / Horizontal usePump can be stand or lay down upon your use condition Adjustable 360° pumping angle1″ discharge with 45° hose adaptor (3/4″ & 1/2″) easy turn any angle for pumping Thermal overload protectedAgainst pump dry motor burn out Double seal designOne mechanical seal + one lip seal for long life running Oil freeDesign for Koi Pond 24 hours circulation and pumping water up to 40°C Low … Continue reading “Kenji Pump KJ-125”

Feature Light weight / Tough designThermoplastic motor housing, weight only – 4kgs ( 8.8 lb ) Semi-Vortex impellerPasses 3/8 (9.5 mm) solid Vertical Float switch designWork in 10″ (254 mm) diameter pit automatically Thermal overload protectedAgainst pump dry motor burn-out Double seal designOne mechanical seal + one lip seal for long life running Oil freeDesign for Koi pond 24 hours circulated and pumping water up to 40°C 1/3 HP (250 W) 2″ discharge with 1.5″ hose adaptor for use 100% … Continue reading “Kenji Pump KJ-250”

Characteristic Special design for shaft seal, use the latest teflon below seal with inner self-cooling design, without use the circulated cooling pipe. Excellent capability to self priming, Extremely powerfull self priming force Built with check valve fully prevents liquid back-flow in pump FRPP and PVDF material provide good corrosion – resistance to strong acid and alkali Special design for strengthening construction

Character Shaft spread design, specially for great volume of water flow Easy to operate, no need high voltage-power. More economic, and almost no vibration and noise Pump body and pump casing made by alloy copper and stainless steel, reliable and corrosice-resist Use grinding resist-double mechanical seal, reliable for sea water, muddy waste-water Cable connector special designed with good water-resist Precison designed short srew, easy to dismastle and assemble.

Specifications Type 250DSE – 150 Power 1-1/2 HP, 1.1 kW Discharge 1 inch Suction 1 1/4 “ Voltage (50Hz) 1PH / 220V-24OV or 3PH/ 380V-415V Maximum Head (M) 45 Maximum Q (LPM) 140 Dimension   A 319 B 230 C 124 D 435 Weight 25 kg Type  250DSE -150 Power 2 HP, 1.5 KW Discharge 1 inch Suction 1 1/4″ Voltage (50Hz) IPH/220-240V or 3PH/380V-415V Maximum Head (M) 58 Maximum Q (LPM) 160 Dimension   A 319 B 230 C … Continue reading “Double Stage Stainless Steel APP DSE Series”