Category: Pompa GIN

Applications For water supply from well or reservoirsfor domestic use, for civil and industrial applicationsFor garden use and irrigation Operating conditions Maximum fluid temperature to +40°CMaximum sand content : 0.25% Motor on requestSpecial mecahnical sealOther voltages or frequency 60Hz

Main Application : This series pump boast wide range of flow and delivery and are extensively use for electrical irrigation, forest waters spraying , under construction water supply and discharge forfarms, villages, industrial and mining enterprise. Conditions The pumps can operate properly and continuosly under following operation conditions Working medium carries no corrosive, sand contents shall be max 0.10% by volume and granular size shall be max 0.20 mm Medium temperature shall be lower than 40°C and PH shall be … Continue reading “QY Series Oil Dipping Pump GIN”

Product instructions : QD, Q series submersible pump consist of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is monophase or triphase ia at upper part of pump abd seal is used where pump and motor combine, which is a kind of double end mechanical seal, “O” ring are applied to all static joints. Work Conditions : The pump can work properly and continuously under following operational conditions. … Continue reading “Gin Pump QD,Q Series Multistage Submersible Pump”

Applications For waste supply from wells or reservoirsFor domestic use, for civil and industrial applicationFor garden use and irrigation Operating conditionsMaximum fluid temperature to +35°CMaximum sand content : 0.25%Maximum immersion : 80 mMinimum well diameter : 3″ Motor and Pump Rewindable motor or full obturated screen motorThree-phase : 380V-415V/ 50HzSingle-phase ; 220V-240V/ 50HzPumps are designed by casing stessedCurve tolerance according to ISO 2548 Options the Request Equip digital auto-control boxSpecial mechanical sealOther voltages or frequency 60 Hz

Applications For water supply from wells or reservoirsFor domestic use, for civil and industrial applicationsFor garden use and irrigation Operating Conditions Maximum fluid temperature up to +35°CMaximum sand content : 0.25%Maximum immersion : 80 mmaximum well diameter : 4″ Motor and Pump Rewindable motor or obturated creen motorThree-pahse : 380V-415V/ 50HzSingle-phase : 220V-240V/ 50HzEquip with star control box or digital auto-control bos Pumps are designed by casing stressedNEMA dimension standardCurve tolerance according to ISO 2548 Options on RequestSpecial mechanical sealOther … Continue reading “100 QJD 4 series GIN PUMP”

Applications For water supply from wells or reservoirFor domestic use, for civil and industrial applicationsFor garden use and irrigation Operating Conditions Maximum fluid temperature up to +50°CMaximum sand content : 0.25%Maximum immersion : 80 mMinimum well diameter : 4″ Motor and Pump Rewindable motor or full obtural screen motor Three pahase : 380 V – 415V/ 50HzSingle-pahse : 220V – 240V/ 50HzEquip with star control box or digital auto-control box NEMA dimension standardsCurve tolerance according to ISO 2548 Option on … Continue reading “Gin Pump 4 SP 2 Series”

Produit Instruction : JYWQ, JPWQ series automatic stir sewage pump that is on the basis of modifications sewage pump that use automatic mixing device, the device with the motor shaft rotation, produce a strong mixing power, stir the sediment in sewage tanks into suspended solids and inhale to pump and discharge, improve the anti-blocking and drainage capacity to complete drainage, clean up, remove silt, saving the cost of running. It is and obvious advanced and practical environmentally-friendly product. Application : … Continue reading “JYWQ Series Automatic stir submersible sewage pump GIN”

General Introduction to Products WQ series cutting submerged sewage discharged pump consist of three component, water pump, sealing grand electrical motor. The motor is mounted on top of pump and of three-phase asynchronized types. Double-face mechnic sealing is mounted between pump and motor. Oshaped oilprood rubber sealing ring is used at each stationary por as static sealing. Conditions : The pump can operate properly and continuously under following operation conditions Working medium carries no corrosives, sands contents shall be max … Continue reading “Submersible sewage GIN Pump WQ”

Applications For water supply from wells or reservoirsFor domestic use, for civil and industrial applicationsFor garden use and irrifation Operating Conditions Maximum fluid temperature up to 40°CMaximum sand content : 0.25 % Motor and Pump Rewindable motorThree-phase : 380 – 415V /50HzSingle – phase : 220V – 240V /50Hz Option ob Request Special mechanical sealOther voltages or frequency 60 Hz

Applications Household water supplyWater supply systemBosst system Working Range Liquid : Clean liquids without suspended solids, non aggresiveLiquid temperature : 10°C and + 80°CAmbient temperature up to + 40°CMax. Working pressure 10 BarContinuous service S1Insulation : BProtection : IP 44