Tokico oil flowmeters are positive displacement type flow meter which are used in a wide variety of application including measuring of boiler fuel and diesel oil, as well as for transactions for kerosene, light oil and heavy oil.
FRO Type
This flowmeters is widely used for transaction and in other application is which a Roots type flowmeters is most suitable.
The Roots rotor rotates without physical contact, resulting in extremely low pressure loss. In addition, its accuracy remain virtually unchanged over a long period of time.
Features :
- Wide flow range and high accuracy
The accuracy of these flowmeters is within ±5% over a wide range of flow rates (max range of 1 : 150 for heavy oil) - Small pressure loss
Because the pressure loss of these meters is low, it is posibble to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids - Compact Design
A positive displacement type flowmeter can be used relatively high rotating speeds, making for compact design. In addition, the counter unit of these meters is compact yet easy-to-read and construction is simple - Excellent durability
The simple construction of these meters makes for longterm durability with virtually no degradation of accuracy - An electrical transmitter unit attachable
A microswich or a read switch type transmitter unit having simple construction and high reliability is available.
Specification :
| Model | FRO Type |
| Bore | 80 mm |
| Model No. direct-reading integrating type | FR00845-02X |
| Accuracy | ±5% |
| Max. working pressure | 10 kgf/cm2 |
| Hydraulic test pressure | 20 kgf/cm2 |
| Flow Range kerosene, Light Oil | 3.500 – 35.000 l/h |
| Max. working temperature | 50°C for kerosene and light oil (100°C with the FGB type) 100°C for heavy oil (120°C with the FGB-00X and FGB-02X types) |
| Flange Rating | JIS 10kgf/cm2FF |
| Material Body | Cast Iron (FC25) |
| Material rotor | FRO type (Aluminium alloy casting) |
| Counter Unit | Integrating pointer and integrating counter ( a reset counter is also available) |
| Electrical Transmitter Unit | |
| Transmitter | FRO type : microswith (M) |
| Power Supply | AC100V 50/60 Hz as standard |
| Number of Pulse | 0-5 PPS |
| Output signal | ON-OFF contact |
| Transmission cable | 2-wire cable with cabtype |
| Normal Operation | |
| Kerosene, Light Oil | 3.500 – 35.000 (Viscosity Intermittent), 3.500-25.500 (Viscosity continous) |
| A heavy Oil | 600-40.000 (Viscosity Intermittent), 600-35.000 (Viscosity continuous) |
| Max | |
| Kerosene, Light Oil | 45 |
| A heavy Oil | 45 |