CHARACTERISTICS :
The TF 35 fog generator has been the fist choice for more than 25 years. When we set out with the firm intention or producing the best equipment on the market there were no limits imposed by an existing ranges of models.
This unit has been designed foruse with insectisides, fungicides and disinfectants. Light weight for cobvenient use in areas where poor roads and tracks make it difficult to handle heavy equipment. He only massproduced unit with a covered air intake valve, providing a silincer effect and protection againts, and solution particles.
- Petrol tank made from stainless steel
- Fog tube made from stainless steel
- Formulation tank made from stainless steel
- Air pump made from made stainless steel
- Reliable ignation system without spark plug
All Other getting in contact with the chemical aremade from brass, viton and teflon
Emegency cut-off device for solution available upon reques.
Technical Spesification :
- Weight in kg, empty but ready for use : 7.9
- Dimensions L x W X H in cm : 137.5 x 27 x 34
- Solution tank capacity in L : Standard ( 5.7 ) Option ( 10 )
- Fuel comsumption , approx in l/h : 2.0
- Performance of combustion chamber in KW/HP : 18.7/25.4
- Maximum flow rate, approx in l/h : 4.2
- Effective horizontal reach, indors, approx. in m : water based with carrier, i.e NEBOL ( 40 ); Oil based (>100)
- Power supply flashlight batteries : 4 x 15 V LR20 (LR6 option)
Considering the maximum flow rate, an operator can treat at a flow rate of 1 liters/2.500 m3 up to 105.00 m3/h or 3.708.000 ft3/h.
TF 35 applies oil based formulation with the standard fog tube. A special “W” fog tube is available for the application of water based formulation.