Features and Benefits
- Low flow accuracy
- Peak flow capacity
- High engineed materials
- Single Jet Class C
- Hermetically sealed register (coppercan/mineral glass envelope)
- Patended ball pivot
- Patended turbine levitation
Wide Measuring Range
- Flostar M is single jet meter available in sizes from DN 40 to DN 150
- Its metrological performance far exceed ISO/EEC class C standards
- Its low accuracy range combined with significant peak flow capacity ensure complete and efficient measurement whatever the faced flow-rates
Reliability
Flostar M features a direct magnetic transmission between the turbine and the register without any intermediate gearing in the matered water
This results in a very robust and reliable design able to withstand most types of potable water environtments.
Ease of read in the toughest humid environtments is secured by hermetically sealed IP68 register (copper can/mineral glass envelope)
Simple and Effective
Simple but highly engieered materials and design enable a very long durability and the best performances for water matering.
Endurances and Peak Resistance
Performance over time is a key requirement for efficient billing. Flostar M features patended turbine ball pivoting enhancing endurance at low flow-rtes. Hydrodynamic balance and turbine design bring resistance at high and peak flows.
Working Principle
Flostar M is a single jet meter. The water jet is canalized by an injector before hitting the turbine. The single jet tapered injector starightens the flow profile. Its large bore area prevents meter overspeed by clogging
The high precision design of the inlet :
- Allows flostar M to meet best accuracy without the need for any by pass or calibration vane adjusment system. The turbine movement is directly transmitted to the extra dry register through a magnetic coupling
- Without the need for any intermediate gearing in the matered water. This allows flostar M to conserve its initial accuracy over time, under the most demanding service conditions of potable water networks. High quality material for the turbine bearing and patended ball pivot.
- Design allows detection of leakages initially ang over time regardless of the flow profiles. The hermatically sealed copper can/mineral glass enveloppe of the IP68 register.
- Is safeguarding the read and integrity of the indicator in the toughest environments (Flooded pits, mechanical tampering attemps)
Communication : Ready For Smart Matering
Flostar M is Supplied Pre-Equipped With Cyble Target
Allows communications and remote reading through :
- Pulse output (Cyble sensor)
- M-Bus protocol (Cyble M-Bus)
- Radio Frequency Wireless Link (Cyble RF)
These cyble modules allows the floster M meter to be connected with various associated system like our supervision system water Mind. They are particularly adapted to commercial and industrial applications where a need for frequent meter monitoring is expressed especially in hard to real locations.
Key Advantages of Cyble Technology
- No need for additional invesment on the meter to implement remote reading
- Itron standardized meterinterface, irresperctive of meter technology and widely spread on itron water maters range
- Reliability brought by electronic switch (no or bouncing)
- Reverse flow management
- Principle proven on the field with a 25 years experience
- Pre equipped being immune to magnetic tampering
Metrological Characteristics :
| Nominal diameter (DN) | 150 mm |
| Minimal Flowrate (Q1) | ≥ 254 l/h |
| Transition flowrate (Q2) | ≥ 406 l/h |
| Permanent flowrate (Q3) | 160 m3/h |
| Overload flow rate (Q4) | 200 m3/h |
| Dynamic (Q3/Q1) | ≤ 630 |
| Standart ratio (Q3/Q1) | 315 |
| Q2/Q1 | 1.6 |
| Accuracy class | 2 |
| Temperature class | T 30 °C |
| Maximum admissible Pressure | 20 bar |
| Orientation | Horizontal |
| Indicating range | 9999999 m3 |
| Verification scale interval | 2 L |
| Starting flow | 90 l/h |
| Accuracy ± 2% from | 300 l/h |
| Accuracy ± 5% from | 200 l/h |
| Admissible peak flow (2hrs. Max) | 260 m3/h |
| Maximum temperature for short period | 60 °C |
| Maximum admissible Pressure | 20 bar |
| Cyble HF pulse weight | 100 L |