Author: muri

Detail Product : The Electro-Pneumatic Positioner NT-100R is used for operating of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges. There is not resonance at 5-200Hz The change of RA/DA acting is convenient, it is able to apply to single or double acting actuator It is possible to prevent the hunting with orifice to the small size actuator It is economical due to … Continue reading “Rotary Type NT-1000R”

Manual Override & Air Filter RegulatorManual Override Housing : Cast Iron or Aluminim Alloy Gear Guardant : Ductile Iron Input Shaft : ASTM A29M+Crhrome plated Temperature Range : 20°C to + 120 °C ( -4°F to + 248°F ) Stroke Adjustment : ± 5°at each end Movement : 0°-90° Finish Paint : Two Polyurethane Coated Enclosure : Sealed to IP65 Torque Range : 300-70000Nm Tecnical Data Model Gear Ratio Input Torque NM Output Torque (Nm) Handwheel Dia (mm) Weight MO30 … Continue reading “Manual Override & Air Filter Regulator”

Specification : Model SV310-08 dan SV320-08 Medium Air Operating Internal Piloted Valve Type 5 Port 2 position Port Size Inlet & Exhaust Port PF. 1/4″ Lubrication Not required Pressure Range 0.15-0.8Mpa Proof Pressure 12 bar Temp. Range -5-60°C (23-140°F) Voltage Range  15%-10% Power Consumption AC= 2.0-3.5VA, DC = 2.5 W Insulation Class Protection Class F IP65 (DIN40050) Connector Socket with Plug Max. Frequency 5 cycle/second

Air Filter Regulator : 5um fltration and high flow capacity Panel Mounting is optional 1/4″ vented spring case is optional Housing Material in aluminium and 316SS Technical Data Sensitivity 25.4 mm water column Flow Capacity 565LPM Exhaust Capacity(5psi above, 20psi set point) 2.8LPM Effect of Suplly Pressure Variation(25psi) On Outlet Pressure < 0.2PSI (0.01bar) Max. Input Pressure 1700KPa Output Pressure Range 0-200Kpa; 0-400KPa; 0-800KPa Filtration 5um Temperature Range -18°C-71°C Total Air Consumption at Max. Output 2.8 LPM Port Size 1/4 … Continue reading “ARF50 Air Filter Regulator”

Deskripsi Produk Pneumatic Actuator : IndicatorA. position indicator with Namur mounting is standart on all HAITIMA pneumatic actuators mounting acessories Pinion The hardened alloy steel pinion is precision ground and Nickel plated ( over 25um) in order to reduce friction, provide maximum wear resistance. Full conformance with the newest standards of ISO5211 & DIN3337. The dimensions can be customized and as options, stainless steel and aluminium are also available. Actuator BodyThe aluminium extrusion is hard anodized ( over 30 um … Continue reading “Pneumatic Actuator”