Close-coupled centrifugal pumps, elcetric motor with extended shaft directly connected to the pump up to 22 kW, new bracket construction for standard motors (stub-shaft construction) from 30 to 75 kW with integrated thrust bearing.
Pump casing with axial suction and radial delivery on top, main dimension and performance according to EN 733.
NM(S) : version with pump casing and lanterm bracket in cast iron.
B-NM(S): version with pump casing and lanterm bracket/ casing cover in bronze (the pump are supplied fully painted).
Connections : Flanges according to PN 10, EN 1092.
Applications
For clean liquids without abrasives, whic are non aggresive for the pump materials (solids content up to 0.2%). For water supply
For heating, air conditioning, cooling and circulation pants.
For civil and industrial application.
For fire fighting applications. For Irrigations.
Operating Conditions
- Liquid temperature -10°C to +90°C
- Ambient temperature up to 40°C
- Total suction up to 7 m
- Maximum permissible working pressure up to 10 bar (16 bar for NM 32L/ 16,20; NM 40/16,20; NM 50/12,16; NM 65/12,20,25; NM 80/16; NM 100/20)
- Continuous duty
Motor
- 2-pole induction motor 50 Hz (n ≈ 2900 rpm)
- NM-NMS : three-phase 230/400 V ±10% up to 3 kW. 400/690 V ±10% from 4 to 75 kW
- Insulation class F. Protection IP 54 (IP 55 for NMS)
- Motor suitbale for operation with frequency converter from 1.1 kW
- Classification scheme IE3 for three-phase motors 0.75 kW
- Constructed in accordance with : EN 60034-1, EN 60034-30-1
Special features on request
- Other voltages. Frequency 60 Hz (as per 60 Hz data sheet )
- Protection IP 55. Specia mechanical seal
- Packed gland (only for NM standard construction)
- Single-phase motor (NMM) up to 1.5 kW
- Higher or lower liquid or ambient temperatures
- Motor suitable for operation with frequency converter to 0.75 kW
Materials
| Component | NM. NMS | B-NM, B-NMS |
| Pump casing Lantern Bracket Nm Casing cover for NMS | Cast Iron | Bronze |
| GJL EN 1561 | G-Cu Sn 10 EN 1982 | |
| Impeller | Cast Iron, GJL 200 EN 1561 | Bronze G-Cu Sn 10 EN 1982 |
| Brass P-CU ZN 40 Pb 2 UNI 5705 for 32/12, 32/16, 32/20, 321/20, 40/20 | ||
| Shaft | Cr-Ni Steel AISI 303AISI 430 from 3 kW to 22 kW | Cr Ni Mo Steel AISI 316 |
| Mechanical seal | Carbon-Ceramic-NBR | |
| Counter – Flanges | Steel Fe 430B UNI 7070 |
Specifications
- Rated motor power output : 5.5 kW, 7.5 Hp
- Maximum suction lift 1-2 m
- Kapasitas Pompa (Q) : Total Head (H)
37.8 M3 (630 l/min) : 21.1 m
42 M3 (700 l/min) : 21 m
48 M3 (800 l/min) : 20.8 m
54 M3 (900 l/min) : 20.6 m
60 M3 (1000 l/min) : 20.3 m
66 M3 (1100 l/min) : 19.9 m
75 M3 (1250 l/min) : 19.1 m
84 M3 (1400 l/min) : 18.2 m
96 M3 (1600 l/min) : 16.5 m
108 M3 (1800 l/min) : 14.4 m
120 M3 (2000 l/min) : 11.8 m - Weight : 74.5 kg