Constructions
Close-coupled centrifugal pumps, electric motor with extended shaft directly connected to the pump up to 22 kW, new bracket construction for standard motors (stub-shaft construction) from 30 to 75 kW with integrated thrust bearing.
Pump casing with axial suction and radial delivery on top main dimensions and performance according to EN 733.
NMS) : version with pump casing and lantern bracket in cast iron.
B-NM(S) : version with pump casing and lantern bracket/ casing cover in bronze (the pumps are supplied fully painted).
Connections : Flanges according to PN 10, EN 1092-2.
Counter-flanges (0n request) : Screwed flanges EN 1092
Applications
For clean liquids without abrasives, which are non-aggresive for the pump materias (solids content up to 0.2%) For water supply.
For heating, air conditioning, cooling and circulation plants.
For civil and industrial applications.
For fire fighting applications. For Irrigation.
Operating Conditioning
- Liquid temperatures from -10°C to +90°C
- Ambient temperature up to 40°C
- Total suction lift up to 7 m
- Maximum permissible working pressure up to 10 bar (16 bar for NM 32L/16,20; NM 40/16,20; NM 50/12,16; NM 65/12,16,20,25; NM 80/16; NM 100/20)
- Continuous duty
Motor
- 2-pole induction motor, 50 Hz (n ≈ 2900 rpm)
- NM, NMS : three-phase 230/400 V±10% up to 3 kW; 400/690 V ± 10% from 4 to 75 kW
- Insulation class F. Protection IP 54 ( IP 55 for NMS )
- Motor suitable for operation with frequency converter from 1.1 kW
- Classification scheme IE3 for three-phase motors from 0.75 kW
- Constructed in accordance with : EN 60034-1; EN 60034-30-1.
Special Features
- Other Voltages. Frequency 60 Hz (as per 60 Hz data sheet)
- Protection IP 55. Special mechanical seal
- Packed gland ( only for NM standard construction)
- Higher or lower liquids or ambient temperatures
- Motor suitable for operation with frequency converter up to 0.75 kW
Materials
| Component | NM. NMS | B-NM, B-NMS |
| Pump casing Lantern Bracket Nm Casing cover for NMS | Cast Iron | Bronze |
| GJL EN 1561 | G-Cu Sn 10 EN 1982 | |
| Impeller | Cast Iron, GJL 200 EN 1561 | Bronze G-Cu Sn 10 EN 1982 |
| Brass P-CU ZN 40 Pb 2 UNI 5705 for 32/12, 32/16, 32/20, 321/20, 40/20 | ||
| Shaft | Cr-Ni Steel AISI 303AISI 430 from 3 kW to 22 kW | Cr Ni Mo Steel AISI 316 |
| Mechanical seal | Carbon-Ceramic-NBR | |
| Counter – Flanges | Steel Fe 430B UNI 7070 |
Specifications
- Rated motor power output : 7.5 kW, 10 HP
- Maximum suction lift 1-2 m
- Kapasitas Pompa (Q) : Total Head (H)
15 M3 (250 l/min) : 57.5 m
16.8 M3 (280 l/min) : 57 m
18.9 M3 (315 l/min) : 56.5 m
21 M3 (350 l/min) : 55.5 m
24 M3 (400 l/min) : 54.5 m
27 M3 (450 l/min) : 52.5 m
30 M3 (500 l/min) : 50.5 m
33 M3 (550 l/min) : 48 m
37.8 M3 (630 l/min) : 42.5 m
39 M3 (650 l/min) : 40.5 m
42 M3 (700 l/min) : 35 m - Weight : 80.5 kg