Analog/ Mechanical Brass Multi Jet Vane Wheel Dry Dial Cold 50°C and hot 90°C Clean Water Meter Size DN 15-DN50 (1/2″-2″)
Description :
SHM Multi Jet Brass Flow Meters : Analog/ Mechanical Flow Meter for Clean Water are made from brass material and interna measuring component made from modern thermoplastic material.
Application :
SHM Multi Jet Brass Meters can be used for :
– Irrigation, cooling systems, filtration systems, water monitoring residential, etc.
Features :
- Multi Jet, Dry Dial, Turbine Type
- Magnetic Drive reliable characteristic, long working life. Pulse output Optional
- Vacuum sealed register ensures the dial keep free from fog and frost, keep the reading clear in a longterm service
- Working temperature 0.1-50°C for Cold Water and 0.1-90°C for Hot water
- Water pressure </=1.0 Mpa or 1.6 Mpa
- Protection Grade : IP 68
Maximum Permisible Error
- In the lower zone from qmin inclusive up to but excluding qt is +/-5%
- In the upper zone from qt inclusive up to and qs is +/-2% for hot water meter +/-3%
- ISO 9001 and ISO 4064
- Warranty 2 years (full service and spare parts)
Technical Specifications
| Size (DN) | 25, 1 Inch (25 mm) |
| Over Load Flow Qs | 7 m3/hour |
| Permanent Flow Qp | 3.5 m3/hour |
| Transitional Flow QT | 280 m3/hour |
| Min Flow Qmin | 70 l/hour |
| Length (L) | 260 mm |
| Width | 103.5 mm |
| High (H) | 124 mm |
| Weights | 1.85 kg |