Analog/ Mechanical Brass Multi Jet Vane Wheel Dry Dial Cold 50°C and Hot 90°C Clean Water Meter Size DN 15-DN 50 (1/2″-2″)
Description :
SHM Multi Jet Brass Floe Meters : Analog/ Mechanical Flow Meter for Clean Water are made from brass material and nternal measuring component made from modern thermoplastic material.
Application :
SHM Multi Jet Brass Flow Meters can be used for :
– Irrigation, cooling systems, filtration systems, water monitoring, residentials, etc
Features :
- Multi Jet, Dry Dial, Turbine Type
- Magnetic Drive reliable characteristic, long working life. Pulse output Optional
- Vacuum sealed register ensures the dial keep free from fog and frost, keep the reading clear in a longterm service
- Water pressure </=1.0 Mpa or 1.6 Mpa
- Working temperature 0.1-50°C for Cold Water and 0.1-90°C for Hot water
- Protection Grade : IP 68
Maximum Permissible Error :
- In the lower zone from qmin inclusive up to but excluding qt is +/-5%
- In the upper zone from qt inclusive up to and qs +/-2%. For hot water meter +/-3%
- ISO 9001 and ISO 4064
- Warranty 2 years (full service and spare parts
Technical Specifications
| Size (DN) | 15, 1/2 Inch (15 mm) |
| Over Load Flow Qs | 3 m3/hour |
| Permanent Flow Qp | 1.5 m3/hour |
| Transitional Flow QT | 120 l/hour |
| Min Flow Qmin | 30 l/hour |
| Length (L) | 165 mm |
| Width | 98 mm |
| High (H) | 116 mm |
| Weights | 1.65 kg |