Tokico oil flowmeters are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transactions for kerosene, light oil and heavy oil
FGP Type
This flowmwters employs a gear-type rotor for small volume flow of flow-viscosity oil in heat control applications, etc. It can be used without modification to measure kerosene, light oil or oil. Measuring accuracy is ±0.5%
Features :
- Wide flow range and high accuracy
The accuracy of these flowmeters is within ±0.5% over a wide range of flow rates (max range of 1 : 150 for heavy oil) - Small pressure loss
Because the pressure loss of these meters is low, it is posibble to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids. - Compact design
A positive displacement type flowmeter can be used at relatively high rotating speeds, making for compact design. In addition, the counter unit of these meters is compact yet easy-to-read, and construction is simple - Excellent durability
The simple construction of these meters makes for longterm duarbility with virtually no degradation of accuracy - An electrical transmitter unit attachable
A microswitch or a reed switch type transmitter unit having simple construction and high reliability is available
Specification Product :
| Model | FGB Type |
| Bore | 20 mm |
| Model No. direct-reading integrating type | FGBB631BAL-00X/02X |
| Accuracy | ±0.5% |
| Max. working pressure | 10 kgf/cm2 |
| Hydraulic test pressure | 20 kgf/cm2 |
| Max. working temperature | 50°C for kerosene and light oil (100°C with the FGB type) 100°C for heavy oil (120°C with the FGB-00X and FGB-02X types) |
| Flange Rating | JIS 10kgf/cm2FF |
| Material Body | Cast Iron (FC25) |
| Material rotor | FRO type (Aluminium alloy casting) |
| Counter Unit | Integrating pointer and integrating counter ( a reset counter is also available) |
| Electrical Transmitter Unit | |
| Transmitter | FGB type : Reed Switch (S) |
| Power Supply | AC100V 50/60 Hz as standard |
| Number of Pulse | 0-5 PPS |
| Output signal | ON-OFF contact |
| Transmission cable | 2-wire cable with cabtype |
| Normal Operation | |
| Kerosene, Light Oil | 40-1.250 |
| A heavy Oil | 20-1.250 |