The pump in the PRIOX series are constructed in 100% AISI 304 stainless steel. They operate entirely immersed in the pumped liquid, which serves to cool the motor from the exterior. Automatic version (aut) equipped with fload switch.
Applications
- All applications for lifting and draining wastewater with suspended solid bodies
- Lifting stations with one or more pumps for agricutural and civil complexes
Application Data
- Type of Liquid : Waste and sewage water with solid bodies
- Maximum liquid temperature : 40°C
- Maximum immersion below water level : 7 m
- Minimum drainage level 60 mm (on manual version0
- Free transit of solid bodies : 40 mm; 50 mm (Priox 600/13-Priox 800/18)
Materials :
- Pump Body : Stainless steel X5 CrNi (AISI 304)
- Suction Base : Stainless steel X5 CrNi 1810 (AISI 304)
- Impeller : Cast Stainless steel X5 CrNi 1810 (AISI 304)
- Delivery port : Threaded
- Cover : Cast Stainless steel (Priox 800/18)
- Power Cable ; 10 m H07 RN-F with plug
- Motor Shaft : Stainless Steel X5 CrNiS 1809 (AISI 416)
- Mechanical gasket : Silicon Carbide
- Counterface : Silicon Carbide
- Secondary seal : Lip seal in rubber NBR
- V-ring sand guard : Rubber NBR
Motors : - Dry motor
- Protection rating IP 68
- Insulation class F
- Single phase power supply with permanently activated capacitor and thermal cutout protection incorporated in the motor winding
- Fully insulated cable connection chamber
- Self-lubricating ball bearings
- Rotation speed 2850 rpm
Specifications
- Motor Output : 0.8 HP, 0.6 kW
- Power Motor : 1.2 HP, 0.9 kW
- 1-230 V
- DNM : 2″
- Weight : 9.6 kg