Detail LUTRON DT-2249A STROBOSCOPE :
- The digital stroboscope is used the microprocessor circuit design, high accuracy, digital readout, light duty, that is iedeal for inspecting and measuring the speed of moving gears, fans, centrifuges, pumps, motors, and other equipment used in general industrial maintenance, production, quality control, laboratories, and as well as for schools and colleges for demonstrating strobe action
- Digital synthesis circuit, high stability and high adjusting resolution, easy operation
- Crystal time base to offer high accuracy measurement and last measuring time
- Xenon falsh tube, high intensity
- Wide range : 60 to 30.000 RPM
- Red LED display, easy to red
- Adjustment resolution : 0.1 RPM (<1.000 RPM), 1 RPM (≥ 1.000 RPM)
- High intensity light
- Setting buttons : digital adjust button x2 buuton, + button, +button, -button, easy operating
- Xenon flash tube with plug and and socket, easy to make the tube replacement
- Compact and heavy duty housing case
General Specifications ;
- Display : 14 mm 9.056 inch led, 5 digits
- Flash adjust range : 60 to 30.000 RPM/FPM
– RPM : round per minute
– FPM : flash per minute - Resolution :
0.1 RPM : <1.000 RPM
1 RPM : ≥1.000 RPM - Function buttons : Digital rotate knob, x2 button, +2 button, + button, -button
- Accuracy : ±(0.05% + 1d) (spec. tested under the environment RF field strength less than 3 V/M & frequency less than the 30 MHz only
- Signal stability : The signal adjusting circuit is used the digital synthesis circuit, the output signal will existing high stability and not change
- Power supply :
110 Vac ±10%, 50/60 Hz
220 Vac ±10%, 50/60 Hz
230 Vac ±10%, 50/60 Hz - Circuit :
– Microcomputer LSI circuit and crystal control time base
– Digital synthesis circuit for the signal adjusting - Operating temp : 0 to 50°C (32 to 122°F)
- Operating humidity : less than 80% R.H
- Dimension : 21 x 12 x 12 cm
- Weight : 1 kg/ 2.2 LB
- Housing : compact and impact plastic injection case with plastic miror type reflector
- Calibration ; crystal time base and microprocessor circuit, dont necessary take any external calibration process