PC Series
Self-priming centrifugal pump Jet-Type electric pumps especially in the presence of water mixed with gas. For use in supplying water to pressure boosting irrigation, wash down applications farmhouses and in small-scale agriculture. These pumps are very reliable in the toughest of environments.
Liquid quality requirement : clean, free from solids or abrasive subtances, mon aggresive
Liquid temperature range : from 0°C to +35°C for residential use
Installation ; Fixed in a horizontal position
Cast iron pump body and motor support treated agaist corrosion also on the inner surface. Technoolymer impeller, diffuser and Venturi tupe and brass nozzle. Carbon/ceramic mechanical seal mounted on stainless rotor shaft extension.
Asynchronous closed and cooled with external ventiltion. Rotor mounted on greased sealed-for-life ball bearings, selected to ensure silent running and a long life. Built in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Manufactured according to standard EN 50335-2-41
Motor : IP44 / Class F/ 2900 rpm/ 50 Hz
Standard Voltage : 1 x 220-240 V
Ambient Temperature : Up to 40°C
Before installing the pumps verify that all pipes (iron, plastic, or rubber) are clean inside so to avoid any obstruction to the ejector nozzle. At the foot of the ejector must be installed a foot.
Valve or a checkvalve. Installed the pumps, fill completely booth pipes and pump body with clean water.