The pumps in the PRIOX series are constructed in 100% AISI 304 stainless steel. They operate entirely imersed in the pumped liquid, which serves to cool the motor from the exterior. Designed with retracted impeller and vortex operation. Automatic version (aut) equipped with float switch.
Applications
- All appications for lifting and draining waste water with suspended solid bodies
- Lifting stations with one or more pumps for agricultural and civil complexes
Application Data
- Type of liquid : waste and sewage water with solid bodies
- Maximum liquid temperature : 40°C
- Maximum immersion below water level : 7 m
- Minimum drainage level 60 mm (on manual version)
- Free transit of solid bodies : 40 mm; 50 mm (Priox 600/13-Priox 800/18)
Motor
- Dry motor
- Protection rating IP 68
- Insulation class F
- Single phase power supply with permanently activated capacitor and thermal cutout protection incorporated in the motor winding
- Fully insulate cable connection chamber
- Self lubricating ball bearings
- Rotation speed 2850 rpm
Materials :
- Pup Body : Stainless steel X5 CrNi 1810 (AISI 304)
- Suction base : Stainless steel X5CrNi 1810 (AISI 304)
- Impeller : Cast stainlles steel X5 CrNi 1810 (AISI 304)
- Delivery port : Treaded
- Cover : Cast stainless steel (Priox 800/18)
- Power cable : 10 m H07 RN-F with plug
- Motor shaft : Stainless steel X5 CRNiS 1809 (AISI 416)
- Mechanical gasket : Silicon carbide
- Counterface : Silicon carbide
- Secondary seal : Lip seal in rubber NBR
- V-ring sand guard : Rubber NBR
Specifications
| Motor Output | 1.6 HP, 1.2 kW |
| Power Motor | 2.4 HP, 1.8 kW |
| Volt | 3-400 |
| DNM | 2″ |
| Weight | 12.6 kg |