The pumps in PRIOX series are constructed i 100% AISI 304 stainless steel. They operate entirely immersed in the pumped liquid, which serves to cool the motor from the exterior. Designed with rectacted impeller and vortex operation. Automatic version (aut) equipped with float switch.
Applications
- All applications for lifting and draining waste water with suspended solid bodies
- Lifting stations with one or more pumps for agricultural and livil complexes
Applications Data
- Type of liquid : waste and sewage water with solid bodies
- Maximum liquid temperature : 40°C
- Maximum immersion below water level : 7 m
- Minimum drainage level 60 mm (on manual version)
- Free transit of solid bodies : 40 mm; 50 mm (Priox 600/13-Priox 800/18)
Motor :
- Dry motor
- Protection rating IP68
- Insulation class F
- Single phase power supply with permanently activated capacitor and thermal cutout protection incorporated i the motor winding
- Fully insulated cable connection chamber
- Self-lubricating ball bear
Materials :
- Pump body : Stainless steel X5 CrNi 1810 (AISI 304)
- Suction Base : Stainless steel X5 (CrNi 1810 (AISI 304)
- Impeller : Cast stainles steel X5 CrNi 1810 (AISI 304)
- Delivery port : Threaded
- Power cable : 10 m H07 RN-F with plug
- Motor shaft : Stainless steel X5 CrNiS 1809 (AISI 416)
- Mechanical gasket : Silicon carbide
- Counterface : Silicon carbide
- Secondary seal : Lip seal in rubber NBR
- V-ring sand gurad : Rubber NBR
Specifications :
- Motor Output : 1.1 HP, 0.9 kW
- Power Motor : 1.8 HP, 1.3 kW
- 3-400 Volt
- DNM : 2″
- Weight : 11.1 kg