The pumps in the Priox series are constructed in 100% AISI 304 stainless steel. They operate entirely immersed in the pumped liquid, which serves to cool the motor from the exterior. Designed wit rectacted impeller and vortex operation. Automatic version (AUT) equipped with float switch.
Applications
- All applications for lifting and draining waste water with suspended solid bodies
- Lifting stations with one one or more pumps for agricultural and civil complexes
Applications Data
- Type of liquid : waste and sewage water with solid bodies
- Maximum liquid temperature : 40°C
- Maximum immersion below water level : 7 m
- Minimum drainage level : 60 mm (on manual version)
- Free transit of solid bodies : 40 mm; 50 mm (Priox 600/13-Priox 800/18)
Motor
- Dry motor
- Protection rating IP 68
- Insulation calss F
- Single phase power supply with permanently activated capacitor and thermal cutout protection incorporated in the motor winding
- Fully insulated cable connection chamber
- Rotation speed 2850 rpm
Materials
- Pump Body : Stainless steel X5 CrNi 1810 (AISI 304)
- Suction Base : Stainless steel X5 (CrNi 1810 (AISI 304)
- Impeller : Cast stainless steel X5 CrNi 1810 (AISI 304)
- Delivery port : Threaded
- Power cable : 10 m H07 RN-F with plug
- Motor shaft : Stainless steel X5 CrNi 1810 (AISI 416)
- Mechanical gasket : silikon carbide
- Secondary seal : Lip seal in rubber NBR
- V-ring sand guard : Rubber NBR
Specifications :
- Motor Output : 1.2 HP, 0,9 kW
- Power Motor : 1.8 HP, 1.3 kW
- 1-230 Volt
- DNM : 2″
- Weight : 11.2 kg