Deskription
SHM Turbine Digital Flow Meters : Digital Flow Meter for liquid re made from Stainless Steel. Multi blades rotor mechanism measuring flow and accumulative flow values. Simple structure, light weight, high accuracy, good repeatability, flexible reaction, convenient installation.
Application
Used to measured low viscosity liquid in close conduit, chemical industry, metallurgi, aviation and scientif research departements.
Features
- Thread and Flange Connection
- Material : Stainless Steel
- Rabge : DN 8-500
- Signal Output : RS485, 4-20 mA, HART
- High Accuracy +/-0.5%
- Medium : Liquid
- Flow Range : 0.25-4000
- Power Supply : 12V, 24V DC (Optional)
- Medium Temperature : 0-80°C
- Nominal Pressure : 1.6-42mPa
- IP 65
- Warranty 2 years (Full service nd sapare parts)
Technical Specification
| SIZE | LIQUID | DIMENSION | ||||
| MM | INCH | CONNECTION | PRESSURE Mpa | REGULAR FLOW RATE (m3/h) | EXPANDING FLOW RATE (m3/h) | LENGTH |
| DN 4 | 5/8″ | G 1/2 | 0.04-0.25 | 0.04-0.4 | 295 | |
| DN 6 | 5/12″ | G 1/2 | 0.1-0.6 | 0.06-0.6 | 330 | |
| DN 10 | 1/4″ | G 1/2 | 0.15-1.5 | 0.15-1.5 | 450 | |
| DN 15 | 1/2″ | G 1/FLANGE | 6.3/2.5 FL | 0.45-9 | 0.55-9 | 75 |
| DN 20 | 3/4″ | G 1/FLANGE | 6.3/2.5 FL | 0.5-10 | 0.5-10 | 80 |
| DN 25 | 1″ | G 5/4FLANGE | 6.3/2.5 FL | 0.8-15 | 0.8-15 | 100 |
| DN 32 | 1 1/4″ | G 2/FLANGE | 6.3/2.5 FL | 140 | ||
| DN 40 | 1 1/2″ | G 2/FLANGE | 6.3/2.5 FL | 140 | ||
| DN 50 | 2″ | FLANGE | 150 | |||
| DN 65 | 2 1/2″ | FLANGE | 170 | |||
| DN 80 | 3″ | FLANGE | 200 | |||
| DN 100 | 4″ | FLANGE | 5-100 | 220 | ||
| DN 125 | 5″ | FLANGE | 10-200 | 2250 | ||
| DN 150 | 6″ | FLANGE | 13-250 | 300 | ||
| DN 200 | 8″ | 15-300 | 360 | |||
| DN 250 | 10″ | |||||
| DN 300 | 12″ |