Feature
- Design for civil engineering applications, its easy portability double outer casing and water cooling motor make it possibility to run the pump to low water level
- Epoxy Resin Cable with IP68 standard for waterproof structure, automatic rest motor protector and double mechanical seal made of silicon carbide. Equipped with an AC motor protector to further obtain the best insulated status. It is a very durble and abrasian pump
- Multi-impeller design with High Chrome Alloy Steel (HiCr) impeller, wear plate and wear rings with a hardness rockwell. It hardest and toughest impeller among the construction pump, againts abrasion and meets the requirement from low to high head and small to big capacity
- AS 1.5-7.5kW equipped with Flange discharge connection. The outer cover is built high strength stainless steel
Applications
- Civil engineering, dewatering of tunneling and ground works and for use in storm water sewers
- Dewatering of fluids containing solid sediments
- Ease of mobility for use by contractors, installers and service industries
Performance Spec
| Model | 80ASN21.5 |
| HP (kW) | 2 (1.5) |
| Discharge | 3″ (80) |
| Phase (ΓΈ) | 1 dan 3 |
| Start Method | |
| Phase 1 | Direct |
| Phase 2 | Capacitor |
| Head | 10 m |
| Capacity | 0.5 m3/min, 30 m3/h |
| Solid Passage | 10 mm |
| Weight | |
| 1 Phase | 40 kg |
| 3 Phase | 36 kg |
| Dimension | |
| A | 235 mm |
| B | 511 mm |
| C | 466 mm |
| D | |
| 1 Phase | 448 mm |
| 3 Phase | 403 mm |