FEATURE
- A preision manufactured motor is achieved by utilizing the highest standard of quality control. All rotors adopt heat treatment methods for drive shaft assembling, and stator winding impregnated with varnish that is heat dried in an industrial oven
- HCP’s professional assembly line, complimented with a synthesized production test, ensures the highest level of final pump quaity
- Standardmaccessories include : cable with an epoxy resin sealed water resistant cable base, Auto-cut thermal motor protector dual mechanical seals and lip seal design
- The A-05A is an extremely practical pump with a low temperature, oil filled motor and single seal design (CA/CE)
- Optional1 1/2 (40 mm) Flange for -21/21.5
Application
- Waste water
- Sump drainage
- Flood control
- Dewatering for fish pond or basement and cellars
Performance Spec
| Model | A-21 |
| Output HP (kW) | 1 (0.75) |
| Discharge Inch (mm) | 2″ (50) |
| Phase (ø) | 1 dan 3 |
| Start Method | |
| Phase 1 | Direct |
| Phase 3 | Capacitor |
| Head | 6.5 m |
| Capacity | 0.18 m3/min, 10.8 m3/h |
| Solid Passage | 10 mm |
| Weight | |
| 1 Phase | 17 kg |
| 3 Phase | 15 kg |
| Dimension | |
| A | 245 mm |
| B | – |
| C | 173 mm |
| D | |
| 1 Phase | 430 mm |
| 3 Phase | 430 mm |