FEATURE
- A precision manufactured motor is achieved by utilizing the highest standard of quality control. All rotors adopt heat treatment methods for drive shaft assembling, and stator winding impregnated with varnish that is heat dried in a industrial oven
- HCP’s professional assembly line, complimentedwith a synthesized production test, ensures the highest level of final pump quality
- Standard accessories include : Cable with an epoxy resin sealed water resistant cable base. Auto-cut thermal motor protector dual mechanical seals and lip seal design
- The A-05A is an extremely practical pump, with a low temperature, oil filled motor and single seal design (CA/CE)
- Optional 1 1/2″ (40 mm) flange AN -21/21.5
Application
- Waste water
- Sump drainage
- Flood control
- Dewatering for fish pond or basement and cellars
Performance Spec
| Model | AN-32 |
| Output HP (kW) | 2 (1.5) |
| Discharge Inch (mm) | 3″ (80) |
| Phase (ΓΈ) | 1 dan 3 |
| Start Method | |
| Phase 1 | Direct |
| Phase 3 | Capacitor |
| Head | 10.5 m |
| Capacity | 0.5 m3/min, 30 m3/h |
| Solid Passage | 10.5 mm |
| Weight | |
| 1 Phase | 33 kg |
| 3 Phase | 29 kg |
| Dimension | |
| A | 391 mm |
| B | 249 mm |
| C | 214 mm |
| D | |
| 1 Phase | 591 mm |
| 3 Phase | 510 mm |