FEATURE
- A precision manufactured motor is achieved by untilizing the highest standard of quality control. All rotors adopt heat treatment methods for drive shaft assembling and stator winding impregnated with varnish that is heat dried in an industrial oven
- HCP’s profesional assembly line, complimented with a synthesized production test, ensures the highest level of final pump quality
- Standard accessories include : cable with an epoxy resin sealed water resistant cable base, Auto vut thermal motor protector dua mechanical seals and lip seal design
- The A.05A is an extremely practical pump, with a low temperature, oil filled motor and single seal design (CA/CE)
- Optional 1 1/2″ (40 mm) Flange for AN-21/21.5
Application
- Waste water
- Sump drainage
- Flood control
- Dewatering for fish pond or basement and cellars
Performance Spec
| Model | AN-21.5 |
| Output HP (kW) | 1 1/2 (1.1) |
| Discharge Inch (mm) | 2″ (50), 1 1/2″ (40) |
| Phase (ø) | 1 dan 3 |
| Start Method | |
| Phase 1 | Direct |
| Phase 3 | Capacitor |
| Head | 15 m |
| Capacity | 0.16 m3/min, 9.6 m3/h |
| Solid Passage | 7 mm |
| Weight | |
| 1 Phase | 20 kg |
| 3 Phase | 18 kg |
| Dimension | |
| A | 262 mm |
| B | – |
| C | 187 mm |
| D | |
| 1 Phase | 428 mm |
| 3 Phase | 408 mm |