FEATURE
- A precision manufactured motor is achieved by utilizing the highest standart of quality control. All adopt heat treatment methods for drive shaft asembling, and stator winding impregnated with varnis that is heat dried in an industrial oven.
- HCP’s professional assembly line, complimented with a synthesized production test, ensures the highest level of final pump quality
- Standard accessories include : cable with an epoxy resin sealed water resistant cable base, auto-cut thermal motor protector dual mechanical seals and seal design
- The A-05A is an etremely practical pump, with a low temperature, oil filled motor and single seal design (CA/CE)
- Optional 1 1/2″ (40 mm) Flange for AN -21/21.5
Application
- Waste water
- Sump drainage
- Flood control
- Dewatering for finish pond or basement and cellars
Performance Spec
| Model | A-05B |
| Output HP (kW) | 1/2 (0.4) |
| Discharge Inch (mm) | 2″ (50) |
| Phase (ΓΈ) | 1 dan 3 |
| Start Method | |
| Phase 1 | Direct |
| Phase 3 | Capacitor |
| Head | 8 m |
| Capacity | 0.1 m3/min, 6 m3/h |
| Solid Passage | 7.5 mm |
| Weight | |
| 1 Phase | 13 kg |
| 3 Phase | 12 kg |
| Dimension | |
| A | 226 mm |
| B | |
| C | 161 mm |
| D | |
| 1 Phase | 372 mm |
| 3 Phase | 372 mm |