The multi-jet dry dial meter has been tried and testead a measuring points where a wet dial cannot be used or is not desired. It is characterised by the guaranteed readability of the digit rollers combined with the reliable measuring principle of a multi-jet meter. Constant development gurantees accurate measuring results and the best long-term stability.
it is availablein the well-known WVG body or the flow-optimised ZR-body
Performance Characteristic in Overview :
- Counter construction dry dial
- Proven through wordwide use a million times over
- Viewing window made of high-quality UV-proof plastic
- For horinzontal piping
Technical Data
| Nominal Flow Qn | 15 m3/h |
| Nominal Diameter (DN) | 15 mm 1/2 Inch |
| Overal Length witout conn. L2 | 110/115 mm |
| Overal Length witout connectors. L1 | 225/250 mm |
| Thread connector Rx D2 | 1/2 inch |
| Thread meter G x B D1 | 3/4 inch |
| Maximum Flow Qmax | 3 m3/h |
| Minimum Flow Qmin | 15 l/h |
| Starting Flow | 4 l/h |
| Display range max | 9.999.999 m3 |
| Display range min | 0.05 l |
| Maximum temperature | 50°C |
| Operating pressure, max (PN) | 16 bar |
| head loss at Qmax | 0.6 bar |
| Pulse value | 10/100 l/mp |